793-24-8 – Names and IdentifiersNameN-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamineSynonymsBHT
Email: info@standard-groups.com
| Nome | N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine |
| Sinonimi | BHTOX-4020 Flexzone 7F Vulkanox 4020 Santoflex6PPD Antoxidant 6ppd Antoxidant 4020 Santoflex 134PD Antioxidant 4020 N-(1,3-Dimethylbutyl Rubber Antioxidant 4020 SANTOFLEX(R) 13 PASTILLES Rubber Antioxidant 4020PPD N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine N-(1,3-Dimethylbutyl)-N-Phenyl-1,4-Benzenediamine N-(1,3-Dimethylbutyl)-N-Phenyl-p-phenylene Diamine N-(1,3-Dimethylbutyl)-N’-phenyl-p-phenylenediamine N-(1.3-dimethylbutyl)-N’-phenyl-p-phenylenediamine N-(4-methylpentan-2-yl)-N’-phenylbenzene-1,4-diamine 1,4-BenzenediaMine,N1-(1,3-diMethylbutyl)-N4-phenyl- N1-(4-methylpentan-2-yl)-N4-phenyl-benzene-1,4-diamine 1-N-(4-methylpentan-2-yl)-4-N-phenylbenzene-1,4-diamine 4020,N-(1,3-DiMethylbutyl)-N’-phenyl-p-phenylenediaMine |
| CAS | 793-24-8 |
| EINECS | 212-344-0 |
| InChI | InChI=1/C18H24N2/c1-14(2)13-15(3)19-17-9-11-18(12-10-17)20-16-7-5-4-6-8-16/h4-12,14-15,19-20H,13H2,1-3H3 |
| InChIKey | ZZMVLMVFYMGSMY-UHFFFAOYSA-N |
| Formula molecolare | C18H24N2 |
| massa molare | 268.4 |
| Densità | 0.986~1.00g/cm3 |
| Punto di fusione | 45-46°C |
| punto Boling | 260°C |
| Punto Flash | 204°C |
| Solubilità in acqua | <0.1 g/100 mL at 17 ºC |
| Solubilità | solubile in metanolo |
| Pressione del vapore | 5.22E-07mmHg at 25°C |
| Aspetto | Dark brown black solid |
| Colore | Light orange to Dark red to Black |
| pKa | 6.73±0.32(Predicted) |
| Condizioni di conservazione | Mantenere in luogo buio, sigillato in asciutto, temperatura ambiente |
| Indice di rifrattività | 1.6300 (estimate) |
| MDL | MFCD00072248 |
| Proprietà fisiche e chimiche | Gray-black solid. |
| Utilizzo | Natural rubber and synthetic rubber with anti-ozone agent and antioxidant, ozone crack and flex fatigue excellent protective effect |
| Codici di rischio | R22 – Harmful if swallowed R43 – May cause sensitization by skin contact R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Descrizione della sicurezza | S36/37 – Wear suitable protective clothing and gloves. S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| ID delle Nazioni Unite | UN 3077 9 / PGIII |
| WGK Germania | 2 |
| RTECS | ST0900000 |
| Codice HS | 29215190 |
| Classe di pericolo | 9 |
| Gruppo imballaggio | III |
| Tossicità | LD50 oral in rat: 3580mg/kg |
| scopo | the product is a polluting antioxidant, in addition to good Antioxidant efficacy, and anti-ozone, anti-bending to find the role of cracking and inhibition of copper, manganese and other harmful metals. Its performance is similar to that of antioxidant 4010NA, but its toxicity and skin irritation are smaller than 4010NA, and its solubility in water is better than 4010NA (water loss rate: 4010NA is 50%, and 4020 only 15-20%). Can be widely used in the preparation of tires, tape and many other industrial rubber products, the general dosage of 0.5-1.5%. This product is not suitable for making light-colored products due to serious pollution. Antioxidant 4020 is one of the main varieties of p-phenylenediamine antioxidant. P-phenylenediamine antioxidant is the main good varieties commonly used in rubber industry at home and abroad, and it is also the development direction of antioxidant in the future. It is an antiozonant and antioxidant for natural rubber and synthetic rubber, and has excellent protective effect against ozone cracking and flex fatigue |
| metodo di produzione | a variety of methods can be used to prepare antioxidant 4020. Generally, 4-aminodiphenylamine is obtained by catalytic hydrocondensation with methyl isobutyl ketone. N-(1, 3-dimethylbutyl)-p-aminophenol can also be used to react with aniline at 210-230 °c under the catalysis of iron powder and iodine (or FeCI2, FeCI3), after the condensation reaction is completed, the mixture of the product is obtained by distilling off the volatile substances at 180 ° C. (133 Pa), which is divided into: N-(1, 3-dimethylbutyl)-N’-phenyl-p-phenylenediamine 50%,N,N’-diphenyl-p-phenylenediamine 17.5%,N,N’-bis (1, 3-dimethylbutyl)-p-phenylenediamine 13.4%. |
Disclaimer: Il contenuto di cui sopra è per riferimento e comunicazione solo tra addetti ai lavori del settore e non garantisce la sua accuratezza o completezza. Secondo le leggi e i regolamenti pertinenti e i regolamenti di questo sito web, le unità o le persone fisiche che acquistano articoli correlati devono ottenere qualifiche e condizioni di qualificazione valide.
Telefono aziendale
+86-21-6420 0566
Orario di lavoro
Da lunedì a venerdì
Telefono cellulare:
13816217984
Posta elettronica:
info@qinsun-lab.com
