Introduction2421-28-5 – Names and IdentifiersName3,3′,4,4′-Benzophenonetetracarboxylic dia
Email: info@standard-groups.com
| Nome | 3,3′,4,4′-Benzophenonetetracarboxylic dianhydride |
| Sinonimi | BTDA 4,4-Carbonyldiphthalic anhydride 4,4′-Diphthalic anhydride ketone 4,4′-Carbonylbis[phthalic anhydride] 5,5′-carbonylbis-3-isobenzofurandione 3-Isobenzofurandione,5,5′-carbonylbis-1 5,5′-carbonylbis(2-benzofuran-1,3-dione) 1,3-Isobenzofurandione, 5,5′-carbonylbis- 3,3′,4,4′-Tetracarboxybenzophenone dianhydride 3,3,4,4-Benzophenontetracarbonsaeuredianhydrid, Benzophenone-3,3?4,4?tetracarboxylic dianhydride 3,3′,4,4′-Benzophenonetetracarboxylicdianhydride 3,3′,4,4′-Benzophenonetetracarboxylic dianhydride 3,3′,4,4′-Benzophenone tetracarboxylic dianhydride 3,3′,4,4′-benzophenonetetracarboxylicaciddianhydride 3,3′,4,4′-Benzophenonetetracarboxylic acid dianhydride |
| CAS | 2421-28-5 |
| EINECS | 219-348-1 |
| InChI | InChI=1/C17H6O7/c18-13(7-1-3-9-11(5-7)16(21)23-14(9)19)8-2-4-10-12(6-8)17(22)24-15(10)20/h1-6H |
| Formula molecolare | C17H6O7 |
| massa molare | 322.23 |
| Densità | 1.662g/cm3 |
| Punto di fusione | 219-226℃ |
| punto Boling | 638.8°C at 760 mmHg |
| Punto Flash | 286.1°C |
| Solubilità in acqua | REACTS |
| Pressione del vapore | 3.25E-16mmHg at 25°C |
| Aspetto | Odor-free light yellow powder solid |
| Condizioni di conservazione | RT, argon filled storage |
| Sensibile | Humidity sensitivity |
| Indice di rifrattività | 1.699 |
| MDL | MFCD00005923 |
| Proprietà fisiche e chimiche | BTDA is a tan crystalline powder. The substance has a melting point of 218.67°C and decomposes at 360°C. The autoignition temperature is very high and no flammability is observed. The density of the substance is 1.5452 g/ml and the vapor pressure is 6.53E-011 Pa. The substance is slightly soluble in water, log Pow is 3.3 |
| Utilizzo | Benzophenone-3, 3 ‘,4,4’-tetracarboxylic dianhydride (BTDA) is used in the industrial field as an intermediate and in polycondensation (fiber and powder production) for the manufacture of plastic products or fine chemicals. Since BTDA is only manufactured and handled in the closed conditions of an industrial environment, the consumer risk is minimal. The environmental impact, Ecotoxicology and toxicology information available for BTDA is provided based on research and/or a reliable assessment of its hazard profile. |
| Simboli di pericolo | Xi – Irritant |
| Codici di rischio | R36/37 – Irritating to eyes and respiratory system. |
| Descrizione della sicurezza | S25 – Avoid contact with eyes. |
| Raw Materials | Acetone |
| Downstream Products | 2-Hydroxyethyl methacrylate |
Reacts with water and dissolves in DMF(1G/10ML).
| punto di fusione | 218-222°C (lit.) |
| punto di ebollizione | 320°C 5mm |
| densità | 1,57 g/cm3 |
| vapor density | 1.4 (vs air) |
| Vapor pressure | <0.1mm Hg ( 0 °C) |
| refractive index | 1.6380 (estimate) |
| flash point | 324 °C |
| storage conditions | Atmosfera inerte, temperatura ambiente |
| solubility | DMF: 0.1 g/mL, clear |
| morphology | Needles or Crystalline Powder |
| color | Off-white to brown |
| explosion limit value (explosive limit) | 16% |
| water solubility | REACTS |
| maximum wavelength (& lambda;max) | 580nm(CH3CN)(lit.) |
| sensitivity | Moisture Sensitive |
| sublimation point | 220-230 °C |
| BRN | 761777 |
| InChIKey | VQVIHDPBMFABCQ-UHFFFAOYSA-N |
| Informazioni chimiche NIST | Bis-(3-phthalyl anhydride) ketone(2421-28-5) |
| Informazioni chimiche EPA | Benzophenonetetracarboxylic dianhydride (2421-28-5) |
| ACROS | English |
| SigmaAldrich | English |
| ALFA | Chinese |
| ALFA | English |
| Introduzione | Benzophenone-3, 3 ‘,4,4’-tetracarboxylic dianhydride (BTDA) is used as an intermediate and polycondensation (fiber and powder production) in the industrial field to make plastic products or fine chemicals. Since BTDA is only manufactured and handled under closed conditions in an industrial environment, the consumer risk is minimal. The environmental impact, ecotoxicology and toxicology information available to BTDA is provided based on research and/or reliable assessment of its hazard characteristics. |
| physical and chemical properties | BTDA is a brown crystalline powder. The substance has a melting point of 218.67°C and decomposes at 360°C. The autoignition temperature is very high and no flammability is observed. The density of the substance is 1.5452 g/ml and the vapor pressure is 6.53E-011 Pa. The substance is slightly soluble in water, log Pow is 3.3. |
| applicazione | BTDA is used in the industrial sector as an intermediate in the manufacture of plastic products or fine chemicals. |
| health hazards | BTDA has no acute toxicity through oral and inhalation routes or skin contact. The substance irritates the eyes and respiratory tract. BTDA is sensitive to skin. BTDA is not mutagenic. BTDA is used as an intermediate and polycondensed with BTDA (fiber and powder production) to manufacture plastic products or fine chemicals in the industrial field. The use of BTDA includes the use in closed systems and mixing and mixing in batch processes, as well as the transfer or transfer of substances from containers or large and small containers to containers or large containers. |
| uso | Polymerized monomer, used to synthesize polymeric monomer of high temperature resistant polymer materials. |
| dangerous goods mark | Xi |
| hazard category code | 36/37 |
| safety instructions | 25 |
| WGK Germania | 1 |
| F | 21 |
| auto-ignition temperature | 975 °F |
| TSCA | Sì |
| customs code | 29183000 |
Disclaimer: Il contenuto di cui sopra è per riferimento e comunicazione solo tra addetti ai lavori del settore e non garantisce la sua accuratezza o completezza. Secondo le leggi e i regolamenti pertinenti e i regolamenti di questo sito web, le unità o le persone fisiche che acquistano articoli correlati devono ottenere qualifiche e condizioni di qualificazione valide.
Telefono aziendale
+86-21-6420 0566
Orario di lavoro
Da lunedì a venerdì
Telefono cellulare:
13816217984
Posta elettronica:
info@qinsun-lab.com
