Produttore chimico di alta qualità
Hotline nazionale di consultazione:+86 021-64208466

Nitrobenzene(C6H5NO2)

IntroductionThe chemical formula C₆H₅NO₂ represents nitrobenzene, an aromatic nitro compound. N

Email: info@standard-groups.com

Contenuto

Introduzione

The chemical formula C₆H₅NO₂ represents nitrobenzene, an aromatic nitro compound. Nitrobenzene is a pale yellow oil that smells like almonds. It’s toxic and can cause cancer.

Properties

Melting point: 42.26 °F (5.7 °C)

Boiling point: 411.6 °F (210.9 °C)

Molar mass: 123.11 g/mol

Density: 1.2 g/cm³

Chemical properties

It has active chemical properties and can be reduced to diazonium salts, azobenzene, etc. It will burn and explode when exposed to open flames and high heat. It reacts violently with nitric acid. It is obtained by nitrating benzene with a mixture of nitric acid and sulfuric acid. It is used as an intermediate in organic synthesis and as a raw material for the production of aniline. Nitrobenzene must undergo electrophilic substitution reactions under relatively strong conditions to generate meta-products; it has a weak oxidizing effect and can be used as an oxidant for oxidative dehydrogenation. Nitrobenzene is often produced by reacting benzene with a mixed acid of nitric acid and sulfuric acid. It is mainly used to produce aniline, benzidine, azobenzene, etc. Nitrobenzene is highly toxic. Inhaling a large amount of vapor or contaminating the skin can cause acute poisoning, oxidizing or complexing hemoglobin, turning the blood into dark brown, and causing headaches, nausea, vomiting, etc.

Production and uses

Nitrobenzene is produced from benzene on a large scale.

It’s used to make aniline, which is then used to make dyes, drugs, pesticides, and synthetic rubber.

It’s also used to make lubricating oils.

Health effects Nitrobenzene is toxic by inhalation and skin absorption, It can cause cancer, It can cause male reproductive toxicity, and It can cause skin burns.

Formula molecolareC6H5NO2
massa molare123.11
Densità1.196 g/mL at 25 °C (lit.)
Punto di fusione5-6 °C (lit.)
punto Boling210-211 °C (lit.)
Punto Flash190°F
Solubilità in acquaslightly soluble
Solubilità1.90g/l
Pressione del vapore0.15 mm Hg ( 20 °C)
Vapor Density4.2 (vs air)
AspettoLiquido
ColoreClear yellow
Limite di esposizioneTLV-TWA 1 ppm (~5 mg/m3) (ACGIH,MSHA, and OSHA); IDLH 200 ppm(NIOSH).
Merck14,6588
BRN507540
pKa3.98(at 0℃)
PH8.1 (1g/l, H2O, 20℃)
Condizioni di conservazioneStore below +30°C.
StabilitàStable. Incompatible with strong oxidizing agents, strong reducing agents, strong bases. Flammable. Note wide explosion limits.
Limite esplosivo1.8-40%(V)
Indice di rifrattivitàn20/D 1.551(lit.)
Proprietà fisiche e chimicheThe pure product is colorless to light yellow oily liquid.
melting point 5.85 ℃
boiling point 210.9 ℃
relative density 1.2037
refractive index 1.55296
flash point 88 ℃
soluble in ethanol, ether and benzene, slightly soluble in water.
The Pure product is a colorless to pale yellow oily liquid. Soluble in ethanol, ether and benzene, water-soluble.
UtilizzoNitrobenzene is an important organic intermediate thereof. Nitrobenzene was sulfonated with sulfur trioxide to obtain m-nitrobenzene sulfonic acid. It can be used as a dye intermediate, mild oxidant and anti-dye salt s. Nitrobenzene was sulfonated with chlorosulfonic acid to obtain m-nitrobenzenesulfonyl chloride, which was used as intermediate of dye, medicine and so on. Nitrobenzene is chlorinated to M-nitrochlorobenzene, which is widely used in the production of dyes and pesticides. After reduction, M-chloroaniline can be obtained. Used as a dye orange GC, is also a pharmaceutical, pesticide, fluorescent whitening agent, organic pigment intermediates. Nitrobenzene re-nitration can be m-dinitrobenzene, by reduction can be m-phenylenediamine, used as dye intermediates, epoxy resin curing agent, petroleum additives, Cement accelerator, M-dinitrobenzene such as sodium sulfide for part also principle to M-nitroaniline. For the dye orange base R, is an intermediate of azo dyes and organic pigments.
 

Disclaimer: Il contenuto di cui sopra è per riferimento e comunicazione solo tra addetti ai lavori del settore e non garantisce la sua accuratezza o completezza. Secondo le leggi e i regolamenti pertinenti e i regolamenti di questo sito web, le unità o le persone fisiche che acquistano articoli correlati devono ottenere qualifiche e condizioni di qualificazione valide.


Messaggio online

Dettagli di contatto

Telefono aziendale

+86-21-6420 0566

Orario di lavoro

Da lunedì a venerdì

Telefono cellulare:

13816217984

Posta elettronica:

info@qinsun-lab.com

Codice QR