IntroductionThis product is a colorless or light yellow transparent oily liquid. Odorless, stro
Email: info@standard-groups.com
This product is a colorless or light yellow transparent oily liquid. Odorless, strong stability, not easily volatile, with good plasticizing flame retardancy, oil resistance, electrical insulation, and ease of processing. Insoluble in water, soluble in organic solvents such as benzene, alcohols, ethers, vegetable oils, mineral oils, etc. This product is an important plasticizer for vinyl resin and nitrocellulose. It can increase the flexibility of the paint film when used in paint. It has excellent compatibility. It is a flame retardant for synthetic rubber, PVC, polyester, polyolefin and soft polyurethane foam, and can also be used in polyurethane electronic potting glue This product can endow high polymers with good wear resistance, weather resistance, mold resistance, radiation resistance, and electrical properties. This product is improved by a new process and belongs to the category of environmentally friendly products. There are basically no three wastes generated during the production process, and the product is low toxic.
| Nome | Tricresyl phosphate |
| Sinonimi | TCP Kronitex TCP Disflamol TKP Phosflex Lindol Tritolyl phosphate Tricresyl phosphat Tricresyl phosphate Tritolyl Phosphate, Technical tris(4-methylphenyl) phosphate 3.5.6-trichloropyridin-2(1H)-one Tris(hydroxymethylbenzol)phosphate (containing o-isomers Phosphoric Acid Tritolyl EsterPhosphoric Acid Tricresyl EsterTritolyl Phosphate |
| CAS | 1330-78-5 |
| EINECS | 215-548-8 |
| InChI | InChI=1/3C21H21O4P/c1-16-4-10-19(11-5-16)23-26(22.24-20-12-6-17(2)7-13-20)25-21-14-8-18(3)9-15-21;1-16-10-4-7-13-19(16)23-26(22.24-20-14-8-5-11-17(20)2)25-21-15-9-6-12-18(21)3;1-16-11-13-19(14-12-16)23-26(22.24-20-9-6-7-17(2)15-20)25-21-10-5-4-8-18(21)3/h3*4-15H,1-3H3 |
| InChIKey | ISNNXHQBIBWQHG-UHFFFAOYSA-N |
| Formula molecolare | C21H21O4P |
| massa molare | 368.36 |
| Densità | 1.143 g/mL at 25 °C(lit.) |
| punto Boling | 265°C10mm Hg(lit.) |
| Punto Flash | > 230 ° F |
| Solubilità in acqua | INSOLUBLE |
| Solubilità | organic solvents: miscible(lit.) |
| Pressione del vapore | 0.03 mm Hg ( 25 °C) |
| Aspetto | Polvere |
| Colore | Bianco a bianco |
| Merck | 14.9763 |
| Condizioni di conservazione | Store below +30°C. |
| Stabilità | Stable. Incompatible with strong oxidizing agents. May soften some plastics. Hydrolyzes slowly under alkaline conditions. |
| Indice di rifrattività | n20/D 1.555(lit.) |
| Proprietà fisiche e chimiche | Density 1.143 boiling point 265 ° C (10 mmHg) refractive index 1.555-1.557 flash point> 110°C water-soluble INSOLUBLE |
| Utilizzo | Used as plasticizer for polyvinyl chloride and triacetate fiber (film base) |
| Codici di rischio | R21/22 – Harmful in contact with skin and if swallowed. R51/53 – Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R39/23/24/25 – R62 – Possible risk of impaired fertility R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Descrizione della sicurezza | S28 – After contact with skin, wash immediately with plenty of soap-suds. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S28A – S20/21 – S60 – This material and its container must be disposed of as hazardous waste. S36/37 – Wear suitable protective clothing and gloves. |
| ID delle Nazioni Unite | UN 2574 6.1/PG 2 |
| WGK Germania | 2 |
| RTECS | TD0175000 |
| TSCA | Sì |
| Codice HS | 2919 90 00 |
| Classe di pericolo | 6.1 |
| Gruppo imballaggio | II |
| Raw Materials | Dimethylphenol Chlorine Phosphorus oxychloride |
| LogP | 5.93 |
| Informazioni chimiche EPA | Informazioni fornite da: ofmpub.epa.gov (link esterno) |
| properties | tricresyl phosphate is colorless to light yellow transparent oily liquid, odorless, slightly fluorescent, stable in nature, non-volatile and flame retardant. |
| applicazione | tricresyl phosphate is a standard flame retardant plasticizer for synthetic rubber, polyester and polyvinyl chloride, which can give polymers good wear resistance, weather resistance, mildew resistance, radiation resistance and electrical properties. it can also be used as gasoline additive, lubricating oil additive and hydraulic oil. |
| uso | used as analytical reagent, solvent and plasticizer for nitrocellulose used as plasticizer for polyvinyl chloride and triacetate fiber (film film base) etc used as plasticizer for epoxy resin adhesive, with flame retardant properties. used as gas chromatography stationary liquid (the maximum service temperature is 125 ℃, the solvent is ether), separation and analysis of aromatic hydrocarbons, phenolic isomers, halides, mercaptans, etc. |
| categoria | toxic substances |
| toxicity classification | poisoning |
| acute toxicity | oral-rat LD50: 5190 mg/kg; Oral-mouse LD50: 3900 mg/kg |
| stimulation data | skin-rabbit 500 mg mild; Eye-rabbit 500 mg/24 hours mild |
| Caratteristiche di rischio di infiammabilità | flammable in case of open flame and high heat; toxic phosphorus oxide gas is released during combustion |
| Caratteristiche di stoccaggio e trasporto | warehouse ventilation and low temperature drying; Store separately from oxidants and food additives |
| fire extinguishing agent | water, foam, sand, carbon dioxide |
| occupational standard | TLV-TWA 0.1 mg/m3 |
| auto-ignition temperature | 770 °F |
Disclaimer: Il contenuto di cui sopra è per riferimento e comunicazione solo tra addetti ai lavori del settore e non garantisce la sua accuratezza o completezza. Secondo le leggi e i regolamenti pertinenti e i regolamenti di questo sito web, le unità o le persone fisiche che acquistano articoli correlati devono ottenere qualifiche e condizioni di qualificazione valide.
Telefono aziendale
+86-21-6420 0566
Orario di lavoro
Da lunedì a venerdì
Telefono cellulare:
13816217984
Posta elettronica:
info@qinsun-lab.com
